1
00:00:01,990 --> 00:00:08,700
Mostly little machines are used for development mentors like learning I'm upset about on board 8:0 or

2
00:00:08,700 --> 00:00:18,950
get a base board on double 3 0 6 and for other purposes that requires specific ports to be available.

3
00:00:19,720 --> 00:00:26,170
If a guest is operating in bridged networking mode we're going to be able to access the ports on the

4
00:00:26,170 --> 00:00:29,500
guest unless they are blocked by our firewall.

5
00:00:31,680 --> 00:00:38,050
But if a guest is in lurk mode we don't have a way of getting to the ports.

6
00:00:38,840 --> 00:00:49,090
That a guest might be using to host our service Roger baulks gets around this limitation by allowing

7
00:00:49,090 --> 00:00:54,430
you to map or forward upload from a guest to a port on the host

8
00:00:58,260 --> 00:01:06,200
making whatever services is running on that guest board accessible at the hosted address with a different

9
00:01:06,200 --> 00:01:06,990
board.

10
00:01:08,770 --> 00:01:16,780
Let's take a moment and install them over here in the agast are based on Apache and if you are on Windows

11
00:01:17,500 --> 00:01:22,760
you could install XM or similar to follow along.

12
00:01:23,460 --> 00:01:24,130
All right.

13
00:01:24,130 --> 00:01:26,820
Apat install Abaci too.

14
00:01:27,150 --> 00:01:35,870
If you open up Firefox and visit my guest address I can see the welcome page for the web server.

15
00:01:38,230 --> 00:01:44,870
Trying to receive the same address over here on my host will give me an error.

16
00:01:45,060 --> 00:01:47,940
I need to forward it.

17
00:01:48,110 --> 00:01:50,220
The road through to host

18
00:01:53,350 --> 00:01:55,470
to make this database accessible.

19
00:01:55,630 --> 00:02:00,790
I need to forward the board in order to configure port forwarding.

20
00:02:01,300 --> 00:02:05,050
There are two parts to get the same result.

21
00:02:05,200 --> 00:02:12,280
If your system is just running in that mode you can go into the machine network settings under the laws

22
00:02:12,910 --> 00:02:15,590
and click the port forwarding button.

23
00:02:18,750 --> 00:02:26,070
For me it's December because instead of Nag I am using TechNet log so I need to make the team at the

24
00:02:26,070 --> 00:02:30,300
network level to do that.

25
00:02:30,400 --> 00:02:37,340
I will go to the preferences for what toolbox and choose network and then select my net network

26
00:02:42,210 --> 00:02:42,530
here.

27
00:02:42,540 --> 00:02:50,470
There's a board for billing but then whichever route you take you will come to this window to setup

28
00:02:50,530 --> 00:02:52,440
port forwarding rules.

29
00:02:54,910 --> 00:03:02,430
To add a rule I will click like on here with the green plus I can give the rule name.

30
00:03:02,920 --> 00:03:05,260
I will call it web server.

31
00:03:06,670 --> 00:03:11,320
And I can do it between TZP and UDP for my web server here.

32
00:03:11,320 --> 00:03:16,940
I need DCP but some others have seized me may need UDP or both.

33
00:03:18,970 --> 00:03:20,400
And in which case

34
00:03:25,010 --> 00:03:28,270
you don't make one rule for each protocol.

35
00:03:28,280 --> 00:03:37,810
I believe the host IP blank and the host board is set to 8 0 8 0.

36
00:03:37,950 --> 00:03:48,800
I need to use a board about 1 dealer to 4 on a Linux or Mac host but I can use anything I want on Windows

37
00:03:50,940 --> 00:03:56,880
then I need to put in the guest IP address and remember Diaby.

38
00:03:56,890 --> 00:04:05,420
In my case as you can see on the screen there because my machine is and on magnet log if it were just

39
00:04:05,420 --> 00:04:11,040
on that the IP would be different based on default settings.

40
00:04:12,240 --> 00:04:16,760
You can double click the IP with the networking tools for your platform.

41
00:04:17,840 --> 00:04:24,960
The level set the guest for 2 8 0 which is the board that the web service is running on.

42
00:04:25,860 --> 00:04:29,020
Then I will press OK and leave the settings.

43
00:04:33,100 --> 00:04:38,350
You may be prompted locks to the port through the firewall.

44
00:04:38,350 --> 00:04:46,160
No I will go back to browser on my home system and I and type in localhost.

45
00:04:46,210 --> 00:04:58,760
Remember this is a port on the host computer that we are accessing and we use it 0 8 0 4 4 8 8 0 0 there's

46
00:04:58,780 --> 00:05:02,840
my welcome they showed from the guest Twichell machine.

47
00:05:03,160 --> 00:05:06,610
I got access this from other computer in my network.

48
00:05:07,960 --> 00:05:10,820
Using the IP address of the host I am.

49
00:05:10,850 --> 00:05:16,340
Had happened to know my IP here on the host is.

50
00:05:17,130 --> 00:05:19,520
And for these 8 0 0.

51
00:05:19,540 --> 00:05:28,990
And there we go as a common uses for port forwarding to against include allowing access it on a remote

52
00:05:28,990 --> 00:05:36,430
shell or desktop access and opening a board for ideas on the development of virtual machine.

53
00:05:37,350 --> 00:05:45,450
If you forward a board and you are not able to connect to the service you expect to walk be sure you

54
00:05:45,960 --> 00:05:53,190
be sure to check whether that gets to as has a firewall that blocking access.